92
of the Local Log including the log buffer and the log file.
Syntax
show logging local-config
Command Mode
Any configuration Mode
Example
Display the configuration of the Local Log:
TP-LINK(config)# show logging local-config
show logging loghost
Description
The show logging loghost command is used to display the configuration of the
log host.
Syntax
show logging loghost [index]
Parameter
index ——The index of the log host whose configuration will be displayed.
Display the configuration of all the log hosts by default.
Command Mode
Any Configuration Mode
Example
Display the configuration of the log host 2:
TP-LINK(config)# show logging loghost 2
show logging buffer
Description
The show logging buffer level command is used to display the log information
in the log buffer according to the severity level.
Syntax
show logging buffer level [level]
To Next Page
Loading...
