TP-Link TL-SG5412F

196
show cluster ntdp port-status
Description
The show cluster ntdp port-status command is used to display NTDP
configuration of the certain port.
Syntax
show cluster ntdp port-status [port]
Parameter
port —— The port selected to display the configuration of NTDP. By default, the
configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the NTDP configuration of port 2:
TP-LINK> show cluster ntdp port-status 2
show cluster ntdp device
Description
The show cluster ntdp device command is used to display the device table of
NTDP.
Syntax
show cluster ntdp device
Command Mode
Any Configuration Mode
Example
Display the device table of NTDP:
TP-LINK> show cluster ntdp device
show cluster manage config
Description
When the current switch is Commander Switch, the show cluster manage
config command is used to display the global configuration of Cluster.