102
bridge aging-time
Description
The bridge aging-time command is used to configure aging time for the
dynamic address. To return to the default configuration, please use no bridge
aging-time command.
Syntax
bridge aging-time aging-time
no bridge aging-time
Parameter
aging-time —— The aging time for the dynamic address. The value of it can be
0 or ranges from 10 to 630 seconds. When 0 is entered, the Auto Aging function
is disabled. By default, this value is 300.
Command Mode
Global Configuration Mode
Example
Configure the aging time as 500 seconds:
TP-LINK(config)# bridge aging-time 500
bridge address filtering
Description
The bridge address filtering command is used to add the filtering address
entry. To delete the corresponding entry, please use no bridge address
filtering command. The filtering address function is to forbid the undesired
package to be forwarded. The filtering address can be added or removed
manually, independent of the aging time.
Syntax
bridge address filtering {mac} {vid}
no bridge address filtering [mac] [vid]
Parameter
mac —— The MAC address to be filtered.
vid —— The corresponding VLAN ID of the MAC address. It ranges from 1 to
4094.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
