TP-Link TL-SG5412F

179
Command Mode
Global Configuration Mode
Example
Enable the history sample entries 1,2,3,4 and 8:
TP-LINK(config)# snmp-rmon history enable 1-4,8
snmp-rmon event user
Description
The snmp-rmon event user command is used to configure the user name of
SNMP-RMON Event. To return to the default configuration, please use no
snmp-rmon event user command. Event Group, as one of the commonly used
RMON Groups, is used to define RMON events. Alarms occur when an event is
detected.
Syntax
snmp-rmon event user {index} [user]
no snmp-rmon event user {index}
Parameter
index —— The index number of the event entry, ranging from 1 to 12. You can
only select one entry for each command.
user —— The name of the User to which the event belongs, ranging from 1 to
16 characters. By default, it is public.
Command Mode
Global Configuration Mode
Example
Configure the user name of entry 1 as user1:
TP-LINK(config)# snmp-rmon event user 1 user1
snmp-rmon event description
Description
The snmp-rmon event description command is used to configure the
description of SNMP-RMON Event. To return to the default configuration, please
use no snmp-rmon event description command.