TP-Link TL-SG5412F

60
Example
Replace the Option 82 field of the packets with the switch defined one and then
send out:
TP-LINK(config)# dhcp-snooping information strategy replace
dhcp-snooping information user-defined
Description
The dhcp-snooping information user-defined command is used to permit
users to define the Option 82. To disable the function, please use
no
dhcp-snooping information user-defined comma
nd.
Syntax
dhcp-snooping information user-defined
no dhcp-snooping information user-defined
Command Mode
Global Configuration Mode
Example
Permit users to define the Option 82:
TP-LINK(config)# dhcp-snooping information user-defined
dhcp-snooping information remote-id
Description
The dhcp-snooping information remote-id command is used to configure the
sub-option Remote ID for the customized Option 82.
Syntax
dhcp-snooping information remote-id string
Parameter
string ——Enter the sub-option Remote ID, which contains 32 characters at
most.
Command Mode
Global Configuration Mode