146
no acl bind to-port {policy-name} {port}
Parameter
policy-name —— The name of the policy desired to bind.
port —— The number of the port desired to bind.
Command Mode
Global Configuration Mode
Example
Bind policy1 to Port 1:
TP-LINK(config)# acl bind to-port policy1 1
acl bind to-vlan
Description
The acl bind to-vlan command is used to bind a policy to a VLAN. To cancel
the bind relation, please use no policy to-vlan command.
Syntax
acl bind to-vlan {policy-name} {vlan-id}
no policy to-vlan {policy-name} {vlan-id}
Parameter
policy-name —— The name of the policy desired to bind.
vlan-id —— The ID of the VLAN desired to bind, ranging from 1 to 4094.
Command Mode
Global Configuration Mode
Example
Bind policy1 to VLAN 2:
TP-LINK(config)# acl bind to-vlan policy1 2
show acl time-segment
Description
The show acl time-segment command is used to display the configuration of
Time-Range.
Syntax
show acl time-segment
To Next Page
Loading...
Need help?
General
Weight and Dimensions
