TP-Link TL-SG5412F

74
Parameter
scan-synfin —— Scan SYNFIN attack.
xma-scan —— Xma Scan attack.
null-scan —— NULL Scan attack.
port-less-1024 —— The SYN packets whose Source Port less than 1024.
ping-flood —— Ping flooding attack.
syn-flood —— SYN/SYN-ACK flooding attack.
Command Mode
Global Configuration Mode
Example
Enable two DoS Defend Types named Xma Scan attack and Ping flooding
attack:
TP-LINK(config)# dos-prevent type xma-scan ping-flood
show dos-prevent
Description
The show dos-prevent command is used to display the DoS information of the
detected DoS attack, including enable/disable status, the DoS Defend Type,
the
count of the attack, etc.
Syntax
show dos-prevent
Command Mode
Any Configuration Mode
Example
Display the DoS information of the detected DoS attack globally:
TP-LINK(config)# show dos-prevent