TP-Link TL-SG5412F

26
no vlan-vpn uplink [port-list]
Parameter
port-list ——The port numbers needed to be edited or canceled.
Command Mode
Global Configuration Mode
Example
Configure the ports 1, 3-5, and 8-10 as the VPN Up-link ports:
TP-LINK(config)# vlan-vpn uplink 1,3-5,8-10
show vlan-vpn global
Description
The show vlan-vpn global command is used to display the global configuration
information of the VLAN VPN.
Syntax
show vlan-vpn global
Command Mode
Any Configuration Mode
Example
Display the global configuration information of the VLAN VPN:
TP-LINK(config)# show vlan-vpn global
show vlan-vpn uplink
Description
The show vlan-vpn uplink command is used to display the configuration
information of the VLAN VPN Up-link ports.
Syntax
show vlan-vpn uplink
Command Mode
Any Configuration Mode