TP-Link TL-SG5412F

34
Parameter
promiscuous | host —— configure the private VLAN mode for the switchport.
primary-vid —— Primary VLAN ID, ranging from 2 to 4094.
secondary-vid —— Secondary VLAN ID, ranging from 2 to 4094.
Command Mode
Interface Configuration Mode (interface ethernet / interface range ethernet)
Example
Add promiscuous port10 in Private VLAN as VLAN15 for primary VLAN and
VLAN150 for secondary VLAN:
TP-LINK(config)# interface ethernet 10
TP-LINK(config-if)# switchport private-vlan promiscuous 15 150
show private-vlan
Description
The show private-vlan command is used to display the Private VLAN
configured on the switch.
Syntax
show private-vlan
Command Mode
Any Configuration Mode
Example
Display the configuration information of all Private VLAN:
TP-LINK(config)# show private-vlan
show private-vlan switchport
Description
The show private-vlan switchport command is used to displays the
configuration information of the port in the Private VLAN.
Syntax
show private-vlan switchport [port-num]