TP-Link TL-SG5412F

49
user remove
Description
The user remove command is used to delete an existing user. The current user
can't be deleted by itself.
Syntax
user remove user-name
Parameter
user-name —— An existing user name.
Command Mode
Global Configuration Mode
Example
Delete the user named tplink:
TP-LINK(config)# user remove tplink
user modify status
Description
The user modify status command is used to modify the status of the existing
user. The current user can't be modified by itself.
Syntax
user modify status user-name {disable | enable}
Parameter
user-name —— The existing user name.
disable | enable ——Disable/enable the user.
Command Mode
Global Configuration Mode
Example
Enable the status of user “tp-link”:
TP-LINK(config)# user modify status tplink enable