TP-Link TL-SG5412F Reference Guide

165
Example
Add static multicast IP address 225.0.0.1, which correspond to VLAN 2, and
configure the forward port as port 1:
TP-LINK(config)# igmp-snooping static-entry-add 225.0.0.1 2 1
igmp-snooping filter-add
Description
The igmp-snooping filter-add command is used to configure the multicast
IP-range desired to filter. To delete the corresponding IP-range, please use no
igmp-snooping filter-add command. When IGMP Snooping is enabled, you
can specified the multicast IP-range the ports can join so as to restrict users
ordering multicast programs via configuring multicast filter rules. Multicast IP
addresses ranges from 224.0.0.0 to 239.255.255.255. The range for receivers
to join is from 224.0.1.0 to 239.255.255.255.
Syntax
Igmp-snooping filter-add {id} {start-ip} {end-ip}
no igmp-snooping filter-add {id}
Parameter
id —— IP-range ID, ranging from 1 to 30.
start-ip —— The start multicast IP of the IP-range.
end-ip —— The end multicast IP of the IP-range.
Command Mode
Global Configuration Mode
Example
Add multicast IP-range 225.0.0.1~225.0.0.4 to filter, and specify the IP-range ID
as 20:
TP-LINK(config)# igmp-snooping filter-add 20 225.0.0.1 225.0.0.4
igmp-snooping filter-config
Description
The igmp-snooping filter-config command is used to modify the multicast
filtering IP-range.

TP-Link TL-SG5412F Specifications

General

MAC address table	8000 entries
Jumbo frames support	Yes
Maximum data transfer rate	1 Gbit/s
Supported data transfer rates	10, 100, 1000Mbps
Fan	0
Wi-Fi	No
Diagnostics	VCT
Management platform	SNMP, RMON, WEB/CLI/Telnet
Authentication method	802.1X, Radius
Packet transfer speed	17.99Mpps
Connectivity technology	Wired
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
DHCP features	DHCP client
Security algorithms	SSH, SSL/TLS
Switch type	Managed
Switch layer	L2
Console port	RJ-45
Fiber optic connector	SFP
SFP/SFP+ slots quantity	12
Basic switching RJ-45 Ethernet ports quantity	4
Fiber ethernet cabling technology	100BASE-FX
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Stackable	-
Form factor	1U
Certification	CE, FCC
Product color	Black
Compatible operating systems	Windows 98SE, NT, 2000, XP, Vista, Windows 7\\r MAC OS\\r NetWare\\r UNIX\\r Linux
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	260 mm
Width	440 mm
Height	44 mm