TP-Link TL-SG5412F Reference Guide

120
Example
Enable the Broadcast Control function for port5 and specify the rate as 128kbps:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# storm-control bc-status enable rate 128k
port rate-limit
Description
The port rate-limit command is used to configure the Rate Limit for an Ethernet
port. To disable the Rate Limit, please use no port rate-limit command.
Syntax
port rate-limit [ ingress ingress-rate ] [egress egress-rate ]
no port rate-limit
Parameter
ingress-rate —— Configure the bandwidth for receiving packets on the port, and
the system will automatically select integral multiple of 64Kbps that closest to
the rate you entered as the real Ingress rate.
egress-rate —— Configure the bandwidth for sending packets on the port, and
the system will automatically select integral multiple of 64Kbps that closest to
the rate you entered as the real Engress rate.
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Configure the ingress-rate as 1Mbps and egress-rate as 10Mbps for port5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# port rate-limit ingress 1024 egress 10240
port rate-limit disable ingress
Description
The port rate-limit disable ingress command is used to disable the
ingress-rate limit.
Syntax
port rate-limit disable ingress

TP-Link TL-SG5412F Specifications

General

MAC address table	8000 entries
Jumbo frames support	Yes
Maximum data transfer rate	1 Gbit/s
Supported data transfer rates	10, 100, 1000Mbps
Fan	0
Wi-Fi	No
Diagnostics	VCT
Management platform	SNMP, RMON, WEB/CLI/Telnet
Authentication method	802.1X, Radius
Packet transfer speed	17.99Mpps
Connectivity technology	Wired
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
DHCP features	DHCP client
Security algorithms	SSH, SSL/TLS
Switch type	Managed
Switch layer	L2
Console port	RJ-45
Fiber optic connector	SFP
SFP/SFP+ slots quantity	12
Basic switching RJ-45 Ethernet ports quantity	4
Fiber ethernet cabling technology	100BASE-FX
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Stackable	-
Form factor	1U
Certification	CE, FCC
Product color	Black
Compatible operating systems	Windows 98SE, NT, 2000, XP, Vista, Windows 7\\r MAC OS\\r NetWare\\r UNIX\\r Linux
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	260 mm
Width	440 mm
Height	44 mm