TP-Link TL-SG5412F

195
Parameter
port —— The port selected to display the configuration of NDP. By default, the
configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the NDP configuration of port 2:
TP-LINK> show cluster ndp port-status 2
show cluster neighbour
Description
The show cluster neighbour command is used to display the cluster neighbor
information.
Syntax
show cluster neighbour
Command Mode
Any Configuration Mode
Example
Display the cluster neighbor information:
TP-LINK> show cluster neighbour
show cluster ntdp global
Description
The show cluster ntdp global command is used to display the global
configuration of NTDP.
Syntax
show cluster ntdp global
Command Mode
Any Configuration Mode
Example
Display the global configuration of NTDP:
TP-LINK> show cluster ntdp global