157
configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the configuration of port 5:
TP-LINK(config)# show spanning-tree port-config 5
show spanning-tree region
Description
The show spanning-tree region command is used to display the Region
configuration of MSTP.
Syntax
show spanning-tree region
Command Mode
Any Configuration Mode
Example
Display the region configuration of MSTP:
TP-LINK(config)# show spanning-tree region
show spanning-tree msti config
Description
The show spanning-tree msti config command is used to display the Instance
configuration of Spanning Tree.
Syntax
show spanning-tree msti config {id}
Parameter
id —— The ID of the instance selected to display the configuration, ranging from
1 to 8.
Command Mode
Any Configuration Mode
Example
Display the configuration of instance 1:
To Next Page
Loading...
