EasyManuals Logo

TP-Link TL-SG5412F Reference Guide

TP-Link TL-SG5412F
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #174 background imageLoading...
Page #174 background image
162
member-time —— Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 260.
leave-time —— Leave Time, which is the interval between the switch receiving
a leave message from a host and the switch removing the host from the
multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1.
router-port —— Static Router Port, which is mainly used in the network with
stable topology.
Command Mode
Global Configuration Mode
Example
Enable IGMP Snooping for VLAN 1, and configure Router Port Time as 200
seconds, Member Port Time as 100 seconds, Leave time as 10 seconds and
Static Router Port as port 1:
TP-LINK(config)# igmp-snooping vlan-config-add 1 rtime 200 mtime 100
ltime 10 rport 1
igmp-snooping vlan-config
Description
The igmp-snooping vlan-config command is used to modify IGMP Snooping
parameters for individual VLANs. To return to the primary configuration of the
corresponding VLAN, please use no igmp-snooping vlan-config command.
Syntax
igmp-snooping vlan-config {vlan-id} [rtime router-time] [mtime member-time]
[ltime leave-time] [rport router-port]
no igmp-snooping vlan-config {vlan-id}
Parameter
vlan-id —— The ID of the VLAN desired to modify configuration, ranging from 1
to 4094.
router-time —— Router Port Time. Within this time, if the switch does not
receive IGMP query message from the router port, it will consider this port is not
a router port any more. Router Port Time ranges from 60 to 600 in seconds. By
default, it is 300.
member-time —— Member Port Time. Within this time, if the switch does not

Table of Contents

Other manuals for TP-Link TL-SG5412F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-SG5412F and is the answer not in the manual?

TP-Link TL-SG5412F Specifications

General IconGeneral
MAC address table8000 entries
Jumbo frames supportYes
Maximum data transfer rate1 Gbit/s
Supported data transfer rates10, 100, 1000Mbps
Fan0
Wi-FiNo
DiagnosticsVCT
Management platformSNMP, RMON, WEB/CLI/Telnet
Authentication method802.1X, Radius
Packet transfer speed17.99Mpps
Connectivity technologyWired
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates10, 100, 1000 Mbit/s
Copper ethernet cabling technology1000BASE-T, 100BASE-TX, 10BASE-T
DHCP featuresDHCP client
Security algorithmsSSH, SSL/TLS
Switch typeManaged
Switch layerL2
Console portRJ-45
Fiber optic connectorSFP
SFP/SFP+ slots quantity12
Basic switching RJ-45 Ethernet ports quantity4
Fiber ethernet cabling technology100BASE-FX
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Stackable-
Form factor1U
CertificationCE, FCC
Product colorBlack
Compatible operating systemsWindows 98SE, NT, 2000, XP, Vista, Windows 7\\r MAC OS\\r NetWare\\r UNIX\\r Linux
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth260 mm
Width440 mm
Height44 mm

Related product manuals