51
Chapter 10 User Manage Commands
User Manage Commands are used to manage the user’s logging information by Web, CLI or SSH,
so as to protect the settings of the switch from being randomly changed.
user name
Description
The user name command is used to add a new user or modify the existed
user’s information. To delete the existed users, please use no user name
command.
Syntax
user name user-name password password [ type { guest | admin }] [ status
{ disable | enable} ]
no user name user-name
Parameter
user-name ——Type a name for users' login, which contains 16 characters at
most, composing digits, English letters and underlines only.
password ——Type a password for users' login, which contains 16 characters at
most, composing digits, English letters and underlines only.
guest | admin —— Access level. Guest means that you can only view the
settings without the right to edit and modify. Admin means that you can edit,
modify and view all the settings of different functions. It is “admin” by default.
disable | enable ——Enable/disable the user. The new added user is enabled by
default.
Command Mode
Global Configuration Mode
Example
Add and enable a new admin user named tplink, of which the password is
password:
TL-SG5428(config)# user name tplink password password type admin status
enable
To Next Page
Loading...
Need help?
General