TP-Link TL-SG5428 User Manual

217
default, the neighbor information of all the ports will be displayed.
Syntax
show lldp neighbor-information interface [ gigabitEthernet port ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LLDP and LLDP-MED neighbor information of port 1:
TL-SG5428# show lldp neighbor-information interface gigabitEthernet 1/0/1
show lldp traffic interface
Description
The show lldp traffic interface command is used to display the LLDP statistic
information between the local device and neighbor device of the corresponding
port. By default, the LLDP statistic information of all the ports will be displayed.
Syntax
show lldp traffic interface [ gigabitEthernet port ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LLDP statistic information of port 1:
TL-SG5428# show lldp traffic interface gigabitEthernet 1/0/1

TP-Link TL-SG5428 Specifications

General

Brand	TP-Link
Model	TL-SG5428
Category	Switch
Language	English