TP-Link TL-SG5428 User Manual

181
show spanning-tree mst
Description
The show spanning-tree mst command is used to display the related
information of MST Instance.
Syntax
show spanning-tree mst { configuration [ digest ] | instance instance-id
[ interface [ gigabitEthernet port ]]}
Parameter
instance-id —— Instance ID desired to show, ranging from 1 to 8.
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the region information and mapping information of VLAN and MST
Instance:
TL-SG5428(config)#show spanning-tree mst configuration
Display the related information of MST Instance 1:
TL-SG5428(config)#show spanning-tree mst instance 1
Display all the ports information of MST Instance 1:
TL-SG5428(config)#show spanning-tree mst instance 1 interface

TP-Link TL-SG5428 Specifications

General

Brand	TP-Link
Model	TL-SG5428
Category	Switch
Language	English