222
Syntax
cluster commander name
no cluster commander
Parameter
name —— The cluster name, ranging from 1 to 16 characters.
Command Mode
Global Configuration Mode
Example
Configure the newly created cluster name as tp:
TL-SG5428(config)#cluster commander tp
cluster manage
Description
The cluster manage command is used to configure the hold time and interval to
send handshake packets of the cluster. To return to the default configuration,
please use no cluster manage command.
Syntax
cluster manage [ holdtime hold-time | timer interval-time ]
no cluster manage [ holdtime | timer ]
Parameter
hold-time —— Hold Time, which is the time for the switch to keep the cluster
information. Hold Time ranges from 1 to 255 in seconds. It is 20 by default.
interval-time —— Interval Time, which is the interval to send handshake
packets. Interval Time ranges from 1 to 255 in seconds. It is 20 by default.
Command Mode
Global Configuration Mode
Example
Specify the Hold Time and Interval Time of the cluster as 50 seconds:
TL-SG5428(config)#cluster manage holdtime 50
TL-SG5428(config)#cluster manage timer 50
cluster member
To Next Page
Loading...
Need help?
General