TP-Link TL-SG5428

45
Example
Display the global GVRP status:
TL-SG5428(config)# show gvrp global
show gvrp interface
Description
The show gvrp interface command is used to display the GVRP configuration
information of all ports or a specified Ethernet port.
Syntax
show gvrp interface [ gigabitEthernet port ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the GVRP configuration information of all Ethernet ports:
TL-SG5428(config)# show gvrp interface
Display the GVRP configuration information of port 2:
TL-SG5428(config)# show gvrp interface gigabitEthernet 1/0/2