85
value ——The maximum time for the switch to wait for the response before
resending a request to the supplicant., ranging from 1 to 9 in second. By default,
it is 3.
Command Mode
Global Configuration Mode
Example
Configure the IP address of the accounting server as 10.20.1.100 and password
as tplink:
TL-SG5428(config)# radius auth-pri 10.20.1.100 auth-key tplink
radius server-account
Description
The radius server-account command is used to enable the accounting feature.
To disable the accounting feature, please use no radius server-account
command.
Syntax
radius server-account
no radius server-account
Command Mode
Global Configuration Mode
Example
Enable the accounting feature:
TL-SG5428(config)# radius server-account
show dot1x global
Description
The show dot1x global command is used to display the global configuration of
801.X.
Syntax
show dot1x global
To Next Page
Loading...
