TP-Link TL-SG5428

216
ports will be displayed.
Syntax
show lldp interface [ gigabitEthernet port ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LLDP and LLDP-MED configuration of port 1:
TL-SG5428# show lldp interface gigabitEthernet 1/0/1
show lldp local-information interface
Description
The show lldp local-information interface command is used to display the
LLDP and LLDP-MED local information of the corresponding port. By default,
the information of all the ports will be displayed.
Syntax
show lldp local-information interface [ gigabitEthernet port ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LLDP and LLDP-MED local information of port 1:
TL-SG5428# show lldp local-information interface gigabitEthernet 1/0/1
show lldp neighbor-information interface
Description
The show lldp neighbor-information interface command is used to display
the LLDP and LLDP-MED neighbor information of the corresponding port. By