TP-Link TL-SG5428 User Manual

150
Syntax
loopback-detection recover
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Recover the blocked port 2 to normal status:
TL-SG5428(config)# interface gigabitEthernet 1/0/2
TL-SG5428(config-if)# loopback-detection recover
show loopback-detection global
Description
The show loopback-detection global command is used to display the global
configuration of loopback detection function such as loopback detection global
status, loopback detection interval and loopback detection recovery time.
Syntax
show loopback-detection global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of loopback detection function:
TL-SG5428# show loopback-detection global
show loopback-detection interface
Description
The show loopback-detection interface command is used to display the
configuration of loopback detection function and the status of the specified
Ethernet port.
Syntax
show loopback-detection interface [ gigabitEthernet port ]
Parameter
port —— The Ethernet port number.

TP-Link TL-SG5428 Specifications

General

Brand	TP-Link
Model	TL-SG5428
Category	Switch
Language	English