TP-Link TL-SG5428

31
show dot1q-tunnel interface
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration information of of the VLAN VPN of the interfaces:
TL-SG5428(config)#show dot1q-tunnel interface
show dot1q-tunnel uplink
Description
The show dot1q-tunnel uplink command is used to display the configuration
information of the VLAN VPN Up-link ports.
Syntax
show dot1q-tunnel uplink
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration information of the VLAN VPN Up-link ports:
TL-SG5428(config)# show dot1q-tunnel uplink