TP-Link TL-SG5428

140
Display the configuration of QoS for port 5:
TL-SG5428# show qos interface gigabitEthernet 1/0/5
Display the configuration of QoS for ports 1-4:
TL-SG5428# show qos interface range gigabitEthernet 1/0/1-4
show qos cos-map
Description
The show qos cos-map command is used to display the configuration of IEEE
802.1P Priority and the mapping relation between cos-id and tc-id.
Syntax
show qos cos-map
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of IEEE 802.1P Priority and the mapping relation
between cos-id and tc-id:
TL-SG5428# show qos cos-map
show qos dscp-map
Description
The show qos dscp-map command is used to display the configuration of
DSCP Priority.
Syntax
show qos dscp-map
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of DSCP Priority:
TL-SG5428# show qos dscp-map
show qos queue mode