TP-Link TL-SG5428 User Manual

192
Example
Display the information of all IGMP snooping groups:
TL-SG5428#show ip igmp snooping groups
Display all the multicast entries in VLAN 5:
TL-SG5428(config)#show ip igmp snooping groups vlan 5
Display the count of multicast entries in VLAN 5:
TL-SG5428(config)#show ip igmp snooping groups vlan 5 count
Display the dynamic multicast groups of VLAN 5
TL-SG5428(config)#show ip igmp snooping groups vlan 5 dynamic
Display the static multicast groups of VLAN 5
TL-SG5428(config)#show ip igmp snooping groups vlan 5 static
Display the count of dynamic multicast entries of VLAN 5
TL-SG5428(config)#show ip igmp snooping groups vlan 5 dynamic count
Display the count of static multicast entries of VLAN 5
TL-SG5428(config)#show ip igmp snooping groups vlan 5 static count
show ip igmp snooping filter
Description
The show ip igmp snooping filter command is used to display the Multicast
Filter Address table.
Syntax
show ip igmp snooping filter [ filter-addr-id-list ]
Parameter
filter-addr-id-list ——The multicast ID selected to display the multicast filter
address information. It is optional.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display all the multicast filter address information:
TL-SG5428(config)# show ip igmp snooping filter

TP-Link TL-SG5428 Specifications

General

Brand	TP-Link
Model	TL-SG5428
Category	Switch
Language	English