TP-Link TL-SG5428 User Manual

225
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the NTDP configuration globally:
TL-SG5428# show cluster ntdp
Display the NTDP configuration of all Ethernet ports:
TL-SG5428#show cluster ntdp interface
Display the NTDP configuration of port 2:
TL-SG5428# show cluster ntdp interface gigabitEthernet 1/0/2
Display the information of device collected through NTDP:
TL-SG5428# show cluster ntdp device-list
show cluster neighbour
Description
The show cluster neighbour command is used to display the cluster neighbor
information.
Syntax
show cluster neighbour
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the cluster neighbor information:
TL-SG5428# show cluster neighbour
show cluster
Description
When the current switch is Commander Switch, the show cluster command is
used to display the global configuration of Cluster.
Syntax
show cluster

TP-Link TL-SG5428 Specifications

General

Brand	TP-Link
Model	TL-SG5428
Category	Switch
Language	English