TP-Link TL-SG5428

170
TL- SG5428(config-mst)# no instance 1
Remove VLANs 1-50 in mapping VLANs 1-100 for Instance 1:
TL-SG5428(config)# spanning-tree mst configuration
TL-SG5428(config-mst)# no instance 1 vlan 1-50
name
Description
The name command is used to configure the region name of MST instance.
Syntax
name name
Parameters
name —— The region name, used to identify MST region. It ranges from 1 to
32 characters.
Command Mode
MST Configuration Mode
Example
Configure the region name of MST as “region1”:
TL-SG5428(config)# spanning-tree mst configuration
TL-SG5428(config-mst)# name region1
revision
Description
The revision command is used to configure the revision level of MST instance.
Syntax
revision revision
Parameters
revision —— The revision level for MST region identification, ranging from 0 to
65535.
Command Mode
MST Configuration Mode
Example
Configure the revision level of MST as 100: