TP-Link TL-SG5428

132
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the description of all Ethernet ports:
TL-SG5428(config)# show interface description
Display the description of port 2:
TL-SG5428(config)# show interface gigabitEthernet 1/0/2 description
show interface flowcontrol
Description
The show interface flowcontrol command is used to display the flow-control
information of an Ethernet port.
Syntax
show interface [ gigabitEthernet port ] flowcontrol
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the flow-control information of all Ethernet ports:
TL-SG5428# show interface flowcontrol
Display the flow-control information of port 2:
TL-SG5428# show interface gigabitEthernet 1/0/2 flowcontrol
show interface configuration
Description
The show interface configuration command is used to display the
configurations of all ports or an Ethernet port, including Port-status, Flow Control,
Negotiation Mode and Port-description.
Syntax
show interface [ gigabitEthernet port ] configuration