TransAct Printrex 980 - Page 199

Appendix A: Ordering Genuine Ithaca Supplies
100-11672 - Rev D Page 189
Code
Detail Code
Item
Description
05
6D(MODULE1)
ED(MODULE2)
Condition
Detected
Printhead position error
Action
1. Check Printhead Lifter part movement.
2. Replace Print Module.
3. Replace Printer Controller PCB.
05
2E(MODULE1)
AE(MODULE2)
Condition
Detected
Printhead position error
Action
1. Check Printhead Lifter part movement.
2. Replace Print Module.
05
4E(MODULE1)
CE(MODULE2)
Condition
Detected
Printhead position error
Action
1. Close Lower Printhead Release Lever.
2. Check Printhead Lifter part movement.
3. Replace Print Module.
4. Replace Printer Controller PCB.
05
2F(MODULE1)
AF(MODULE2)
Condition
Detected
Printhead position error
Action
1. Check Printhead Lifter part movement.
2. Replace Print Module.
05
4F(MODULE1)
CF(MODULE2)
Condition
Detected
Printhead position error
Action
1. Check Printhead Lifter part movement.
2. Replace Print Module.
3. Replace Printer Controller PCB.
05
6F(MODULE1)
EF(MODULE2)
Condition
Detected
Printhead position error
Action
1. Close Lower Printhead Release Lever.
2. Check Printhead Lifter part movement.
3. Replace Print Module.
4. Replace Printer Controller PCB.
05
3D(MODULE1)
BD(MODULE2)
Condition
Detected
Printhead position error
Action
1. Check Printhead Lifter part movement.
2. Replace Print Module.
05
3E(MODULE1)
BE(MODULE2)
Condition
Detected
Printhead position error
Action
Check Printhead Lifter part movement.
05
3E(MODULE1)
BE(MODULE2)
Condition
Detected
Printhead position error
Action
Check Printhead Lifter part movement.
05
5E(MODULE1)
DE(MODULE2)
Condition
Detected
Printhead position error
Action
1. Check Printhead Lifter part movement.
2. Replace Print Module.
3. Replace Printer Controller PCB
06: Purge Unit Position Error
06
20(MODULE1)
A0(MODULE2)
Condition
Detected
Purge Unit position error