TransAct Printrex 980 - Page 216

Appendix B: Frequently Asked Questions
Page 206 100-11672 - Rev D
Code
Detail Code
Item
Description
then
report to manufacturer.
F0
12
Condition
Detected
Invalid address management of USB function
receive buffer
Action
1. Turn off Printer, and then turn on Printer
2. Update the firmware.
3. Save the printer stored data to a file, and
then
report to manufacturer.
F0
13
Condition
Detected
Motor drive sequence end interrupt received at
ASIC stop.
Action
1. Turn off Printer, and then turn on Printer
2. Update the firmware.
3. Save the printer stored data to a file, and
then
report to manufacturer.
F0
14
Condition
Detected
Motor drive function called while motor handler
not
idle.
Action
1. Turn off Printer, and then turn on Printer
2. Update the firmware.
3. Save the printer stored data to a file, and
then
report to manufacturer.