True GDM Series User Manual

33
1. Disconnect the power to the unit.
2. Remove drawers.
3. Remove condensing unit grill.
4.
Locate & remove 2-2 3/4 inch screws in the black plastic trim in the top of each door or top drawer
opening (if necessary remove mullion).
5. Break silicone seal around countertop inside and out.
6. Lift front edge of counter top, about 10˚ to 15 ˚. Push countertop toward back of cabinet to detach counter
top from securing devise.
7. To install, reverse these procedures. Make sure to replace screws and apply silicone seal around edge of
counter top.
TOP REMOVAL FOR TRCB 50 and 79
TRCB 50 and 79
Top
Top Screws
End Bar
Mullion
36˚ F

True GDM Series Specifications

General

Defrost Type	Automatic
Weight	Varies by model
Shelves	Adjustable Wire Shelves
Lighting	LED
Interior Finish	Stainless Steel
Compressor Location	Bottom
Energy Efficiency	Energy Star Certified
Capacity	Varies by model
Dimensions	Varies by model