True GDM Series User Manual

5
ELECTRICAL REQUIREMENTS
There are several factors that will affect the proper operation of your True unit. A m o n g
these factors, the electrical installation is the most important and should always be
checked before connecting your True cabinet as follows:
1. Make sure the circuit is dedicated exclusively to your True unit.
2. Make sure the electrical installation complies with national, state, and local codes.
3. Make sure the circuit is properly ground.
4. Check circuit for proper voltage at receptacle (+/-10% 115 Volt)
(- 5% + 10% 208/230 Volt)
5. Make sure that the wire gauge and breaker sizes are correct and comply with the min-
imum allowance for voltage drops
WARNING: FAILURE TO COMPLY WITH THESE REQUIREMENTS MIGHT
R E S U LT IN PERSONAL I N J U RY AND (OR) PROPERTY DAMAGE, AND W I L L V O I D
WA R R A N T Y.

True GDM Series Specifications

General

Defrost Type	Automatic
Weight	Varies by model
Shelves	Adjustable Wire Shelves
Lighting	LED
Interior Finish	Stainless Steel
Compressor Location	Bottom
Energy Efficiency	Energy Star Certified
Capacity	Varies by model
Dimensions	Varies by model