True GDM Series User Manual

46
INSTALLATION INSTRUCTION
TEMPERATURE CONTROL REPLACEMENT CONTINUED.......
Figure 8. Temperature Control Leads
Figure 10. Anchoring Relay Shield
___________ STEP 6 ___________
Replace existing temperature control
with new Danfoss control in repair kit:
(See Figure 8).
A. Connect one pink wire from old
control to double terminal #4 on
new temperature control.
B. Place the plastic-coated spade
clip on secondary #4 terminal.
C. Connect other pink wire from old
control to terminal #3 on new
Danfoss temperature control.
(See Figure 8 & 9).
___________ STEP 7 ___________
Anchor the Relay Shield:
(See Figure 10).
A. Secure the new relay by
attaching the relay shield.
B. Relay shield includes two self-
tapping screws. When installing
shield, place shield in position to
cover relay and all exposed wiring.

True GDM Series Specifications

General

Defrost Type	Automatic
Weight	Varies by model
Shelves	Adjustable Wire Shelves
Lighting	LED
Interior Finish	Stainless Steel
Compressor Location	Bottom
Energy Efficiency	Energy Star Certified
Capacity	Varies by model
Dimensions	Varies by model