Turbo Schematic LEVO SL - Link at Shock Extension Installation

13
K
A
K
6.1.3. LINK AT SHOCK EXTENSION
# PART NAME SERVICE PART NUMBER QTY SPEC / DESCRIPTION TOOL
TORQUE
Nm in-lbf
A Shock extension — Carbon
S216300005
1 LINK,MTB,PA TRAIL FSR G1,29F/27.5R,ALY N/A N/A N/A
K Link at extension bolt
Part of suspension bolt kit.
S210500019
2 M12 x 14 mm x 1 mm p, bolt 6 mm hex 24 210
Place a cloth over the frame to prevent the extension arm from damaging the paint.
Do not assemble the rear shock until the motor and battery assemblies are complete.
 Place the extension arm around the seat tube and align the extension arm bores with the link mid bores.
 Grease the non-threaded surfaces, then thread the link at extension bolts (K) into the link mid bores.
 Use a 6 mm hex key to hand tighten the two bolts.