1. INTRODUCTION
1.1. IMPORTANT
THIS ASSEMBLY INSTRUCTION CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND
STORE IN A SAFE PLACE.
This manual was drafted in English (original instructions) and may have been translated into other languages as applicable (translation of
original instructions).
This document is specific to your Turbo Levo SL bicycle and referred to in this manual as the Levo SL.
This manual should be read in addition to the Turbo Levo SL User Manual supplied with your bicycle, and the two documents should be kept
together for future reference. They contain important safety, performance, and technical information specific to your Levo SL, which you
should read before your first ride and keep for reference.
The Levo SL user manual is designed as a reference for a complete bicycle, including the Declaration of Conformity document at the back of
each language section. Since a frame up build requires the assembly of components (suspension fork, seat post, saddle, drivetrain assembly,
cockpit assembly, wheels), the information contained herein is intended to supplement the Levo SL User Manual in order to provide you with
the necessary information required to complete the assembly and eventually use your Levo SL. For assembly, only compatible and e-bike
approved components should be used. Please refer to a component manufacturers’ documentation for assembly instructions.
You should also read the entire Specialized Bicycle Owner’s Manual (“Owner’s Manual”) because it has additional important general
information and instructions which you should follow. If you do not have a copy of this document, you can download them at no cost at www.
specialized.com or obtain them from your nearest Authorized Specialized Retailer or Specialized Rider Care.
1.2. WARNING SYMBOLS
When reading this assembly instruction, note various important symbols and warnings explained below:
WARNING! The combination of this symbol and word indicates a potentially hazardous situation that, if
not avoided, could result in serious injury or death. Many of the Warnings say “you may lose control and
fall.” Because any fall can result in serious injury or even death, we do not always repeat the warning of
possible injury or death.
CAUTION: The combination of the safety alert symbol and the word CAUTION indicates a potentially
hazardous situation that, if not avoided, may result in minor or moderate injury, or is an alert against
unsafe practices.
The word CAUTION used without the safety alert symbol indicates a situation that, if not avoided, could
result in serious damage to the bicycle or the voiding of your warranty.
This symbol alerts the reader to information that is particularly important.
This symbol means that high quality grease should be applied as illustrated.
This symbol means that carbon assembly paste should be applied as illustrated to increase friction.
This symbol highlights the correct torque value for a specific bolt. In order to achieve the specified torque
value, a quality torque wrench must be used.
Tech tips are useful tips and tricks regarding installation and use.
We may occasionally issue updates and addenda to this document. Please periodically check
www.specialized.com or contact Rider Care to make sure you have the latest information.
Info: www.specialized.com
SPECIALIZED BICYCLE COMPONENTS
15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229
0000193160_SC_R4, 4/23
A
1
LH
PART NUMBER
SYMBOLS LEGEND
ASSEMBLY PROCESS ORDER
INSERT PATH
ASSEMBLY DIRECTION
GREASE
BLUE THREAD LOCK
LEFT HAND THREAD
VIDEO GUIDE LINK
BOLT TORQUE REQUIRED
To Next Page
Loading...
