Turbo Schematic LEVO SL - Down Tube Channel Plug

16
A
30
sec
<
1
2
3
6.1.6. DOWN TUBE CHANNEL PLUG
REAR BRAKE GUIDE TUBE
DERAILLEUR GUIDE TUBE
# PART NAME SERVICE PART NUMBER QTY SPEC / DESCRIPTION
A
Down tube channel plug
S226500009 1
ICR,CABLE GUIDE,MTB,PA TRAIL FSR G1,29F/27.5R
 1: Place a small amount of Loctite 416 at the end of the rear brake guide tube. Briefly allow the glue to spread around the guide tube.
 2. Quickly insert the guide tube as far as possible into the base of the down tube channel plug (A) and hold in place allowing the glue to set.
 Repeat the process with the rear derailleur guide tube.
 3. Insert the channel plug into the cable guide tube that runs down the inside of the down tube.
Loctite 416 has a 20-30 second work time.
Ensure the down tube channel plug is completely inserted into the guide tube. Failure to do so could cause the
battery to snag.