Turbo Schematic LEVO SL - Final Adjustments and Checks

54
6.5.10. FINAL ADJUSTMENTS
Once fully assembled, remove the bicycle from the bicycle stand.
 Adjust the headset play, align the stem, and torque all the bolts to the manufacturer’s specifications.
 Adjust the handlebar angle and torque all the bolts to the manufacturer’s specifications.
 Arrange the cockpit components and torque all the bolts to the manufacturer’s specifications.
System power up and registration
 Connect the charger and charge the battery.
 Power up the system using the TCU/MasterMind TCU.
 Connect to Turbo Studio and perform the firmware updates.
 Complete online registration. Register bicycle here.
 Perform a test ride.