Ulvac GI-M2 - 6 Starting up Gauge (Supply of Power)

20
6.STARTING UP GAUGE (SUPPLY OF POWER)
Turn on the power switch on the front panel of the
controller to feed power. POW-① appears and setup
is completed.
ＰＯＷ－①
The ○ portion in the left figure
lights.
（GI-D7 dose not turn on Em-Lo/Ezm-
Hi.）
GI-M2
[
０．００ －
10
] is displayed on the
segment indicator.
GI-D7 ・ SnS1(WIT) setting
[
０．００ －
7
] is displayed on the
segment indicator.
GI-D7 ・ SnS2(WIB) setting
[
０．００ －
8
] is displayed on the
segment indicator.
GI-N8
[
０．００ －
11
] is displayed on the
segment indicator.
Pa
Check
connection.
Check
pressure.
CAUTION