EasyManua.ls Logo

Unipulse F320 - Page 27

Unipulse F320
129 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.CONNECTION
13
    Attaching a Ferrite Core
Wind the AC cable around the attached ferrite core.
WARNING
• Connect with no power applied because it may cause an electric shock.
• The attached AC cable is designed for domestic use in Japan, and its rating is 125V AC,
7A. For use at voltages exceeding the rating and for overseas use, have a separate AC
cable prepared.
• Since the F320 has no power switch, install a breaker.
• Be sure to ground the protective ground terminal to prevent electric shocks and failures by
static electricity. (The frame and protective ground terminal are conducted.)
Do not use other screws than that attached to the main body (M4×8 binding-head
machine screw with a toothed washer).
• To take measures against lightning surge, install a lightning surge protector (optionally
available).
AC cable
Wind the cable (one turn)
Ferrite core
F320
around the ferrite core.

Table of Contents

Related product manuals