3.CONNECTION
14
◇ Connecting a Lightning Surge Protector
To take measures against lightning surge, install a lightning surge protector.
EN61000-4-5 (lightning surge immunity) out of the EMC directives applies to
the F320 body and lightning surge protector in combination.
Lightning surge protector
For connecting the lightning surge protector, a
cable with an EU plug (optionally available) is
required.
* MAINTRAB MNT-1D is a trademark of
PHOENIX CONTACT.
MAINTRAB MNT-1D
No lightning surge protector [MAINTRAB MNT-1D] is included as a
standard. It is optionally available (TSU01) in combination with a
250V AC high-voltage cable in EU outlet form (See below:
Standard product in Europe). For details, contact our sales
department.
To Next Page
Loading...
