System Menu
ADVANCED OPERATION GUIDE 6-25
6
3
Select the default file
format.
4
Press [OK].
File Separation
Select the default file separation setting. The available default settings are
shown below.
NOTE: Refer to page 2-19 for file separation.
Use the procedure below to select the default file separation setting.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults and then [Change]
of File Separation.
3
Select the default for
[Off] or [Each Page].
4
Press [OK].
Common Settings - File Format
Set default file type .
Cancel OK
Status 10/10/2007 10:10
PDF
TIFF
High Comp.
PDF
JPEG
File Format Description
Off No file separation performed (all the pages
are compiled in one file).
Each Page Each scanned page is created into a
separate file.
Common Settings - File Separation
Select the default file separation setting .
Off
Eac h Page
Cancel OK
Status 10/10/2007 10:10
To Next Page
Loading...
