Vacon NX series Applications Manual

1 BASIC APPLICATION
1.1 INTRODUCTION
The Basic Application is a simple and easy-to-use application. It is the default setting on
delivery from the factory. Otherwise select the Basic Application in menu M6 on page S6.2.
See the product's User Manual.
Digital input DIN3 is programmable.
The parameters of the Basic Application are explained in Chapter 8 Parameter descriptions of
this manual. The explanations are arranged according to the individual ID number of the
parameter.
1.1.1 MOTOR PROTECTION FUNCTIONS IN THE BASIC APPLICATION
The Basic Application provides almost all the same protection functions as the other
applications:
•
External fault protection
•
Input phase supervision
•
Undervoltage protection
•
Output phase supervision
•
Earth fault protection
•
Motor thermal protection
•
Thermistor fault protection
•
Fieldbus fault protection
•
Slot fault protection
Unlike the other applications, the Basic Application does not provide any parameters for
choosing the response function or limit values for the faults. For more information on the
motor thermal protection, see ID704 in Chapter 8 Parameter descriptions.
BASIC APPLICATION VACON · 11
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
1

Vacon NX series Specifications

General

Product type	AC Drive
Output voltage range	0-Uin
Frequency range	0-500 Hz
Enclosure classes	IP00, IP21
Mounting types	Wall
Braking chopper	Integrated or external
EMC filter	Built-in or external
Control modes	Scalar, Vector
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Communication options	Modbus, Profibus, CANopen, Ethernet
Ambient temperature range	-10°C to +50°C
Cooling method	Air-cooled