Vacon NX series - System Menu (Control Keypad: Menu M6); Expander Boards

Table 23: Keypad control parameters, M3
Index Parameter Min Max Unit Default Cust ID Description
P3.1 Control place 1 3 1 125
1 = I/0 terminal
2 = Keypad
3 = Fieldbus
P3.2 Keypad reference P2.1 P2.2 Hz 0.00
P3.3
Direction (on key-
pad)
0 1 0 123
You can adjust the
frequency refer-
ence on the keypad
with this parame-
ter.
R3.4 Stop button 0 1 1 114
0 = Limited func-
tion of Stop button
1 = Stop button
always enabled
3.4.11 SYSTEM MENU (CONTROL KEYPAD: MENU M6)
For parameters and functions related to the general use of the AC drive, such as application
and language selection, customised parameter sets or information about the hardware and
software, see the product's User Manual.
3.4.12 EXPANDER BOARDS (CONTROL KEYPAD: MENU M7
The M7 menu shows the expander and option boards attached to the control board and board
related information. For more information, see the product's User Manual.
VACON · 68 LOCAL/REMOTE CONTROL APPLICATION
3
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205