Vacon NX series - Multi-Purpose Control Application - Parameter Lists; Monitoring Values (Control Keypad: Menu M1)

6.4 MULTI-PURPOSE CONTROL APPLICATION - PARAMETER LISTS
6.4.1 MONITORING VALUES (CONTROL KEYPAD: MENU M1)
The monitoring values are the actual values of parameters and signals as well as statuses
and measurements. Monitoring values marked with asterisk (*) can be controlled from the
fieldbus.
VACON · 130 MULTI-PURPOSE CONTROL APPLICATION
6
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205