Vacon NX series - Page 177

Table 75: NXS drives: Identification parameters (Control keypad: Menu M2 -> G2.6.25)
Index Parameter Min Max Unit Default Cust ID Description
P2.6.18.1 Speed step -50.0 50.0 % 0.0 1252
NCDrive speed
tuning.
P2.6.18.2 Torque step -100.0 300.0 % 0.0 1253
NCDrive torque
tuning.
MULTI-PURPOSE CONTROL APPLICATION VACON · 177
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
6