Vacon NX series - Page 179

Table 76: NXP drives: Identification parameters (Control keypad: Menu M2 -> G2.6.25)
Index Parameter Min Max Unit Default Cust ID Description
P2.6.25.22 Iu Offset -32000 32000 10000 668
P2.6.25.23 Iv Offset -32000 32000 0 669
P2.6.25.24 Iw Offset -32000 32000 0 670
P2.6.25.25 Speed step -50.0 50.0 % 0.0 1252
NCDrive speed
tuning.
P2.6.25.26 Torque step -100.0 100.0 % 0.0 1253
NCDrive torque
tuning.
MULTI-PURPOSE CONTROL APPLICATION VACON · 179
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
6