Vacon NX series - Page 225

Table 99: Motor control parameters, G2.6
Index Parameter Min Max Unit Default Cust ID Description
P2.6.10
Overvoltage con-
troller
0 2 1 607
0 = Not used
1 = Used (no
ramping)
2 = Used (ramping
P2.6.11
Undervoltage con-
troller
0 1 1 608
0 = Not used
1 = Used
P2.6.12 Identification 631
0 = No action
1 = Identification
w/o run
* = Apply the Terminal to Function (TTF) to these parameters (see Chapter 8.9 "Terminal to
function" (TTF) programming principle).
PUMP AND FAN CONTROL APPLICATION VACON · 225
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
7