Vaisala Indigo500 Series - Cable Gland and Conduit Options

8
3
4
2
7
6
5
Figure 2 Indigo510 transmitter parts, non-display version
2 Transmitter base
3 Transmitter cover
4 Cable gland for Ethernet cable and optional analog output cable (M20×1.5 lead-through)
5 Cable gland for probe connection cable (M16×1.5 lead-throughs)
6 Cable gland for optional relay cable and power cable in the PELV and AC (mains) power
supply options (M20×1.5 lead-through)
7 Hex screws for opening the cover
8 Status LED (only in non-display model)
2.3.1 Cable gland and conduit options
The transmitter has 4 lead-throughs. The glands or conduit fittings for the lead-throughs are
selected when ordering the transmitter. Unused lead-throughs are plugged.
The following figure shows examples of dierent cable gland and conduit configurations
available from Vaisala.
Chapter 2 – Product overview
15