Figure 24 Units settings on touchscreen
1. Select the configuration menu symbol at the upper right corner of the touchscreen.
2. Select Transmitter > Units.
3. Select the unit type: default metric, default non-metric, or custom units.
If you select default metric or default non-metrics units, all measurement parameters will
use the selected unit type.
4. To define custom units for the measurement parameters one-by-one, select the units from
the drop-down lists for each parameter, and select Select.
5.1.4 Configuring screen lock on touchscreen
You can enable screen lock to lock the configuration menu. Screen lock functionality prevents
accidental selections. Home views can still be viewed when screen lock is on.
Screen lock is a functionality introduced in software version 1.11.0.
Indigo510, Indigo520 User Guide M212287EN-N
58
To Next Page
Loading...
